DCS 6000 Digital Conference System
User Manual
9
After some seconds the following type of screen is
shown:
This screen will be different on the various
Interpreter sets, depending on the individual set-up
of the Interpreter Unit. If the welcoming screen
does not disappear, the interpreter set has not been
set-up. For setting up the interpreter set, please see
next section.
A black dot in the middle of the first line indicates
that the Audio out from the interpreter unit is
muted. The reason for this is communication
problems. Cables etc. have to be checked.
Setup menu
Before using an Interpreter Unit, a set-up of the
Booth number and B-language has to be done on all
interpreters’ sets.
When b is kept depressed and B is activated the set-
up menu is shown:
When the unit is un-configured (has not yet
received an address) the first two menus will not be
available. This is indicated by the missing “-“
If the B-select buttons is pressed the last two menu
items are shown:
A menu is selected by pressing the button to the left
of the menu (a-d). Then the display shows the next
level of menus or selections.
Booth selection
Pressing the (d) button selects the Booth set-up
menu:
Press c-button for selecting the Booth number for
the Interpreter Unit. A black dot is indicating the
selection. Then use Relay-select up/down to
scroll through the available languages. The Desk
number will automatically change to the next
available desk for the selected language. To save
the selection, press OK (B-button).
If the desk number is set to an already occupied
desk number the set will take over the
configuration from the set on that desk and the
other set will be loose the configuration.
“B” language selection
When B-language is selected by pressing the c-
button, the following menu will appear.
Press button (c) for selecting the B-language for
the Interpreter Unit. A black dot is indicating the
selection. Use Relay-select up/down to scroll
through the available languages.
Press button (a) for selecting the B-mode for the
Interpreter Unit. The B-mode selection has the
following choices:
All
The interpreter can select
any B-language himself.
One
Only the B-language chosen at the B-
language selection can be used during operation.
None
During operation no B-language can be
used (the B-button has no function except for b-
B).
To save the selection, press OK (B-button).
Ver. and serial no.
This is an information menu showing the version,
software serial number and the address assigned
to the unit by the CU 61xx Central Unit.
Press OK to return to the Set-up menu
Communication status
This is an information menu showing the
communication status of the unit.
-Booth/desk no.
▲
-B-language/B-mode
-Ver. and serial no.
-Communication status
▼
Booth/desk no.
▲
B-language/B-mode
-Ver. and serial no.
-Communication status
▼
-Backlight
▲
-AB with mic on
▼
Booth:
■
7 - 7 Norwegian OK
Desk number: Cancel
1
B-language:
■
7 Norwegian OK
B-mode: Cancel
One
IS6132 rev. D
SW ver.: 053.009 OK
Serial #: 055.004.255
Address: 215
Rx Errors: 0
Tx Retries: 0 OK
Tx dropped: 0 Reset
11 SWE FLOOR 2
1 ITA FLOOR ENGLISH
3 FR FLOOR 11
4 DAN FLOOR SWEDISH
11 SWE FLOOR
■
2
1 ITA FLOOR ENGLISH
3 FR FLOOR 11
4 DAN FLOOR SWEDISH
