Shure Easyflex EZG/12, User Manual

Page: 2 / 19

ENGLISH
1
GENERAL
Shure Easyflex
t
EZG and EZG-SE Series microphones are miniature gooseneck-
mounted electret condenser microphones designed primarily for speech and vocal pickup.
They can be mounted on lecterns, pulpits, or conference tables. All models include a pre-
amplifier and are available with cardioid cartridges. EZG-SE Series microphones can be
screwed onto a microphone stand or the supplied 5/8 inch, 27 threaded flange. They can
be easily changed from side-exit to bottom-exit to conceal the cable.
FEATURES
S
Single gooseneck section near microphone base for easy orientation of the
microphone.
S
Tubular preamp body sized to fit many standard accessories.
S
Slide on windscreen.
S
(SE) 5/8–27 threaded nut with cable exit provides a variety of mounting
possibilities.
S
EZG/18SE offers extended length for greater positioning range
S
(SE) External preamp reduces visible size of the microphone.
MODEL VARIATIONS
S
EZG/12: 305 mm (12 in.) gooseneck microphone.
S
EZG/18: 457 mm (18 in.) gooseneck microphone.
S
EZG/12SE: 305 mm (12 in) gooseneck microphone; includes side exit option.
S
EZG/18SE: 457 mm (18 in) gooseneck microphone; includes side exit option.
INSTALLATION GUIDELINES
1. Aim the microphone toward the desired sound source, such as the talker, and
away from any unwanted sound source, such as a loudspeaker.
2. Place the tip of the microphone within 15 to 30 cm (6 to 12 in.) of the desired
sound source.
3. Always use the supplied windscreen to control breath noise.
4. If four or more microphones will be open at the same time, use of an automatic
mixer, such as the Shure SCM810 or FP410, is recommended.