Increase headband width for additional
head grip.
Slide the boom to position the microphone
within 13 mm (1/2 inch)
of the right corner of your mouth.
To avoid "popping" or other breath
noise, do not place directly
in front of mouth.
Replacement Parts
BCAWS2
Replacement windscreen for BRH50M
BCAEC50
1 pair of replacement earcup pads for BRH50M
BCASCA-NXLR3QI
Replacement cable for BRH headset - terminates to
XLR3M and 1/4 in. Neutrik connectors (7.5 ft. length)
BCASCA-NXLR3QI-
25
Replacement cable for BRH headset - terminates to
XLR3M and 1/4 in. Neutrik connectors (25 ft. length)
BCASCA-NXLR4
Replacement cable for BRH headset - terminates to
XLR4M Neutrik connector (7.5 ft. length)
BCASCA-NXLR5
Replacement cable for BRH headset - terminates to
XLR5M Neutrik connector (7.5 ft. length)
BCASCA-NXLR4-
FEM
Replacement cable for BRH headset - terminates to
XLR4F Neutrik connector (7.5 ft. length)
BCASCA-1
Replacement cable for BRH headset - unterminated
(bare whip) (6.5 ft. length)
Shure Incorporated
BRH50M
Broadcast Headset
3/7
2017/10/23