background image

Summary of Contents for 588SA

Page 1: ...without feedback This suppression of feedback combined with their smooth sound makes these microphones ideal for use with orchestras small combos and vocalists The microphones feature A built in wire mesh screen with a special filter that provides protection from wind pop explosive breath sounds This filter also enables singers and speakers to perform close to the microphone A true cardioid patter...

Page 2: ... iron heat Carefully clean and tin the conductors and the connections to which the con ductors are to be soldered The soldering operation can then be done with a minimum of heat thereby avoiding any possibility of damage to the cable Guarantee Each microphone is guaranteed to be free from electrical and mechanical defects for a period of one year frcm date of shipment from factory provided all ins...

Page 3: ...be 60 0 db where 0 db 1 milliwatt with 10 microbars The microphone rating impedance shall be 150 ohm and the Gm sensitivity at 1 000 Hz shall be within i 3 db of 153 0 referenced to EIA Standard SE 105 August 1949 The Model 588SA 588SB 588SBE shall be provided with a swivel adapter adjustable through 90 from vertical to horizontal The microphone is equipped with a built in ON OFF switch and a one ...

Page 4: ... 155 0 db 0 db 1 volt per microbar 0 db z 1 Milliwatt with 10 microbars 0 db EIA Standard SE 105 August 1949 Built in ON OFF switch with lockplate furnished Microphone is shipped with lockplate installed To lock switch in ON position loosen screw on lockplate and turn lockplate 180 Tighten screw Internal vibration isolation of rubber construction Highly durable cable with exceptionally effective h...

Reviews: