Instrcution SR201 for Un-pressurized Integrated Solar Hot Water Heater
-
8-
Note
：
1). Depending on the way of difference installation, we provide two different sensors,
and the customer chooses one of them as
needed. If the customer does not specify
anything, we will follow the factory default
configuration.
a)
”Side mounted sensor”
(Factory default configuration) see the picture 1
b).
”Top mounted sensor”
(Need to be specified in order) see the picture2
2). To avoid the measuring error or damage the sensor, sensor of temperature and
water level must not touch or close to the e-heater tube
3.System diagram
Note: this diagram is only for reference.