Instrcution SR201 for Un-pressurized Integrated Solar Hot Water Heater
-
3-
1. Safety information
We have carefully checked the text and pictures of this manual and provided the best of
our knowledge and ideas, however inevitable errors maybe exist. Please note that we
cannot guarantee that this manual is given in the integrity of image and text, incorrect,
incomplete and erroneous information and the resulting damage we do not take
responsibility.
1.1 Installation and commissioning
When laying wires, please ensure that no damage occurs to any of the
constructional fire safety measures presented in the building.
The controller must not be installed in rooms where easily inflammable gas
mixtures are presented or may occur.
The permissible environmental conditions can’t be exceeded at the site of
installation.
Before connecting the device, make sure that the power supply matches the
specifications that controller requires.
All devices connected to the controller must conform to the technical specifications
of the controller.
All operations on an open controller are only to be conducted cleared from the
power supply. All safety regulations for working on the power supply are valid.
Connecting and /or all operations that require opening the collector (e.g. changing
the fuse) are only conducted by specialists.
1.2 Liability waiver
The manufacturer can’t monitor the compliance with these instructions or the
circumstances and methods used for installation, operation, utilization and maintenance
of this controller. Improper installation can cause damages to material and person. This
is the reason why we do not take over responsibility and liability for losses, damages or
cost that might arise due to improper
installation, operation or wrong utilization and maintenance or that occurs in some
connection with the above-mentioned. Moreover, we do not take over liability for patent