Shredmaster 330s, Instruction Manual

Page: 4 / 28

Guarantee
Operation of this machine is guaranteed for one year from
date of purchase, subject to normal use. Within the guarantee
period, GBC will at its own discretion either repair or replace
the defective machine free of charge. Defects due to misuse
or use for inappropriate purposes are not covered under the
guarantee. Proof of date of purchase will be required. Repairs or alterations made by persons not authorised by GBC will
invalidate the guarantee. It is our aim to ensure that our
products perform to the specifications stated. This guarantee
does not affect the legal rights which consumers have under
applicable national legislation governing the sale of goods.
Register this product online at www.GBCOffice.com
Specifications
Throat Width
Shred Width
Sheet Capacity
Speed
Amperage
Noise Level
Duty Cycle
Volts/Hz
GBC Shredmaster 330s/350s
220 mm
6 mm
4 sheets of 80gm/m 2 paper
2.4 meters per minute
0.7 Amps
70 dB
2/30 Min (ON/OFF)
230V/50Hz
Thermal Cut-off Feature
This shredder is designed for low volume shredding, and is
not intended for continuous operation. This unit features a
thermal cut-off device that automatically shuts off the
shredder if run for an extended period of time. If this occurs,
simply allow the shredder to cool for 30 minutes before
resuming operation.
Clearing Jams
If a paper jam occurs, switch the unit to the reverse position
until the paper is out of the throat. If a jam occurs with paper
more than halfway through the cutters momentarily switch
into the REVERSE position until about 1/2" to 1" of shredded
paper reverses out. Tear off two or three sheets and switch
into the FORWARD position to clear the paper jam. In some
cases, it may be necessary to alternate between FORWARD
and REVERSE positions several times to help clear excess
paper from the cutting area.
Forward and Reverse
Moving the switch to either of these positions will cause the
unit to run in the corresponding direction.
On/Auto
Simply insert paper into the centre of the throat. Once your
document has activated the trigger switch, the unit will turn
on and off automatically.
Materials you can shred
Your shredder will handle most any type of office paper
documents. You can safely shred documents containing
staples, however, other metal items may damage the
shredder.
Installation
Position the shredder onto the basket. Once the unit is
correctly positioned on the basket, plug it into a standard
AC outlet.
Service
Do not attempt to service or repair the unit yourself. If your
shredder is under warranty return it to the point of purchase
for replacement or repair. If your shredder is no longer under
the point of purchase return period and requires replacement
or repair, please contact your supplier for further assistance.
330s & 350s