Page-5/6
Please don’t set the same DMX address when controlling with host controller ZK6200/ZK6300.
Host controller can reduce the performance risk by monitor the working status of each machine.
Options
Range
500-620
ON/OFF
70-100
Factory Mode/
User Mode
2 DMX Channel/
4 DMX Channel
Explanation
Set Temperature
Setup inner Core temperature. Please don't change default
value without engineer's suggestion from SHOWVEN.
Auto Heat
Auto preheat function switch after turning on
machine
Density
Adjust the sparks density. Please don't change default
value without engineer's suggestion from SHOWVEN.
Mode Selection
Factory Mode is factory debugging mode, User
Mode is using mode
DMX Channel
Mode
2 DMX Channel is standard mode, 4 DMX Channel
is speical mode.
On/Off
Standby Switch
When it’s on, the machine can only generate spark
when pre-heating finish.
Default Parameter
Press “ENTER” to restore all parameters to the
factory settings.
Cable DMX mode
：
When using the DMX controller, the system takes 2 channels
The First channel
Functions
0-15
Fountain OFF
16-255
Fountain ON
The second channel
Functions
60-80
Clear Material
20-40
Emergency Stop
0-10
240-255
Pre-heat OFF
（
Disable in Auto-heat
）
Pre-heat ON
（
Disable in Auto-heat
）