Page-3/6
Light emitting diode display area:
Bottom Indication Light
：
READY
：
After turning on machine, it will automatically preheat around 6 minutes, when the
"READY" green light turns from flashing into long on, indicates that the machine is ready to work.
When it flashes slowly, it indicates some error.
DMX
：
Flashing shows that DMX signal is connected, otherwise is without signal
FAULT
：
When any malfunction , the light turns on
HEAT
：
When the machine is heating, signal light turns on
MENU
：
Short press to switch interface, press for 3 seconds can switch to the advanced setup
interface.
-
：
Parameters down
+
：
Parameters up
ENTER
：
Confirm and save parameters.
Quick Flashing
：
Preheating
Long on
：
Finish preheating and ready to work
Slow Flashing
：
Error warning
Composite Ti with RFID card, swiping cards used to identify
parameters and types of granules.
Please note that granules RFID card can increase the single
machine specific working time. The card is disposable, can only use
once.
Radio frequency identification area:
Operation Panel:
LCD information display area, showing operate menu and working status of machine.