Channel 11
LED dimmer, (0-9) OFF, (10-255) LED brightness increase
3. 14 channels mode:
Channels
Function
Channel 1
Firing: (0-9) OFF, ( 10-255) ON
Channel 2
Inner LED RED: (0-9) OFF, (10-255) LED brightness increase
Channel 3
Inner LED GREEN: (0-9) OFF, (10-255) LED brightness increase
Channel 4
Inner LED BLUE: (0-9) OFF, ( 10-255) LED brightness increase
Channel 5
Inner LED AMBER: (0-9) OFF, ( 10-255) LED brightness increase
Channel 6
Outer LED RED: (0-9) OFF, (10-255) LED brightness increase
Channel 7
Outer LED GREEN, (0-9) OFF, (10-2551) LED brightness increase
Channel 8
Outer LED BLUE, (0-9) OFF, (10-255) LED brightness increase
Channel 9
Outer LED AMBER, (0-9) OFF, (10-255) LED brightness increase
Channel 10
LED Random: (0-9) OFF, (10-255) LED random color
Channel 11
LED Random (inner LED change color): (0-9) OFF, (10-255) LED random
color
Channel 12
LED color change speed: (0-9) OFF, (10-255) LED color change speed
increase
Channel 13
LED strobe: (0-9) OFF, (10-255) LED strobe increase
Channel 14
LED dimmer, (0-9) OFF, (10-255) LED brightness increase
NOTE: Manual function disabled when DMX connected.
▲
E1 Pressure error explanation
In order to protect pump, SONICBOOM will running self check program to find out whether
there are fog fluid in the fuel pipe.
1. E1 pressure error activation
When there is no fog fluid in the fuel tank, system can not reach preset pressure even turn on
for a long time. The pump will stop working, and report E1.
2. Way to clear E1 error
Fill the fog fluid tank, then restart the machine.
Press
“
VOLUME
”
to reset.
DMX Channel 1, start a firing.
▲
Maintenance
1. Use SHOWVEN original fog fluid for the best effect of SONICBOOM. Warranty will be void if
any other type fluid is used.
2. Don
’
t disassemble the machine by unauthorized person, modifications to the machine are
not allowed.
3. Excessive dust, liquid or dirt etc on the equipment will affect performance of the machine
and cause poor heat dissipation. Remove dust with air compressor, vacuum or soft brush. Use a
damp cloth to clean the case.
4. Before storing the machine, run distilled water through the system to help avoid condensing
the pump or heater.
