\ MAX CONTINUOUS OUTPUT DURATION: 10s
\ OUTPUT: 80000cuft/min
\ FLUID CONSUMPTION RATE: 3min/L
\ TANK CAPACITY: 5L
\ DMX CHANNEL: 1/11/14
\ CONSUMABLES: FX-S
▲
Operation Panel
1. Control button area
MENU: switch through setup menu
+: Parameter up; multiplex
“
TIMER
”
(smoke output time)
-: Parameters down; multiplex
“
VOLUME
”
(smoke output start)
ENTER: confirm and save parameters (screen will blink once when save successfully); multiplex
“
STOP
”
.
NOTE: Screen will switch to main interface automatically if not press any button in long time.
▲
Interface
1. Main interface:
First Line: DMX address,
“
:
”
blinks when there is DMX in signal.
Second Line: shows machine core temperature and pressure. The machine ready for operate
only when both temperature and pressure value close to 100%.
2. Error information:
Example of
“
TIMER
”
setting function in the menu:
1.
“
set interval 10s
”
2.
“
set duration 2s
”
SONICBOOM will repeat: firing 2s, interval of 10s, firing 2s, interval
10s
…
Press
“
VOLUME
”
button under main interface, SONICBOOM activated and start to
generate smoke, and press
“
STOP
”
to stop the machine.
Error information
Explanation
E1 Pressure
Pressure faults, no fog fluid or pump error
E2 K temp. Sensor
Temperature sensor fault
E5 Temp Over
Circuit fault
E6 Heat Fail
Heating element damage or circuit fault or
unstable voltage
