14
Ordercode: 40297
Titan Strobe BLAZE
4. DMX Error (DMX Settings)
With this menu you can determine what the Titan Strobe will do in case of a DMX signal error.
01)
Press the UP/DOWN buttons until the display shows NO DMX.
02)
Press the OK button to open the menu.
03)
Press the UP/DOWN buttons to select one of the 3 modes:
When a DMX signal error occurs, the light output will be blacked out.
When a DMX signal error occurs, the Titan Strobe will use the last working DMX signal,
ensuring an undisrupted performance.
When a DMX signal error occurs, the Titan Strobe will switch to Manual mode.
04)
Press the OK button to confirm your choice.
5. Strobe Brightness (Manual Mode)
With this menu you can set the brightness of the strobe.
01)
Press the UP/DOWN buttons until the display shows STROBE_M.
02)
Press the OK button to open the menu.
03)
Press the UP/DOWN buttons to set the strobe brightness. The adjustment range is between
, from dark to brightest.
04)
Press the OK button to save changes.
6. Strobe Frequency (Manual Mode)
With this menu you can set the frequency of the strobe.
01)
Press the UP/DOWN buttons until the display shows STROBE_S.
02)
Press the OK button to open the menu.
03)
Press the UP/DOWN buttons to set the strobe frequency. The adjustment range is between
, from low to high frequency and OFF.
04)
Press the OK button to save changes.
7. LED Master Dimmer (Manual Mode)
With this menu you can set the master dimmer of the LEDs.
01)
Press the UP/DOWN buttons until the display shows C_MASTER.
02)
Press the OK button to open the menu.
03)
Press the UP/DOWN buttons to set the dimmer brightness. The adjustment range is between
, from dark to brightest.
04)
Press the OK button to save changes.
8. LED Color Macros (Manual Mode)
With this menu you can set the desired color macro.
01)
Press the UP/DOWN buttons until the display shows C_PRESET.
02)
Press the OK button to open the menu.
03)
Press the UP/DOWN buttons to choose one of the 10 color macros
.
04)
If you select
, all 10 color macros will be displayed in a sequence.
05)
Press the OK button to confirm your choice.
9. LED Color Switch/Flow Speed (Manual Mode)
With this menu you can set the color switch/flow speed.
01)
Press the UP/DOWN buttons until the display shows C_SPEED.
02)
Press the OK button to open the menu.
03)
Press the UP/DOWN buttons to set the color switch/flow speed. The adjustment range is between
, from slow to fast.
04)
Press the OK button to save changes.
