SHOWTEC Spectral 300 Q4, Product Manual

Page: 9 / 25

7
Backside
6b
3
Fig. 2
4 5 6
6a
4a 4b
3)
LCD Display
4) DMX IN (4b) and OUT (4a) 50cm
5) Menu Buttons
6) Power connector 50 cm (6a) needs to be connected to special 3-pin powerconnector 6b (1,5m)
Sometimes you are not able to enter the main menu of the Spectral 300 Q4.
The display will be blank and when you press the
MENU button, the display will show you vertical lines.
This means the Spectral is in Lock Mode.
To unlock the device press: UP + DOWN +UP + DOWN ! and then MENU .
Installation
Remove all packing materials from the Spectral 300 Q4. Check that all foam and plastic padding is
removed. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply. The device can be music-controlled by its built-in
microphone.