9
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
When preparing for operation, please lock the 4 wheels to avoid shaking when the head is in motion.
1.
Leave at least 1 meter on all sides for air circulation.
2.
Plug one end of the electric mains power cord into the socket on the unit
.
Then plug the other end of the cord into a proper electric power supply socket.
Note : Link all cables before connecting electric power
1 2 3 4 5 6
1)
ON: Manual Lamp On
2)
OFF: Manual Lamp Off
3)
IN: from controller to IN (Sky Rose)
4)
OUT to second Sky Rose
5)
High Sky use:
ON: Automatic Lamp On
OFF: Manual Lamp ON / OFF
6)
Power Connector
Manual lamp OFF
is easy for cooling
down. The lamp is off, but the cooling
fans keep cooling the Sky Spot.
High Sky
use ON is easy when the Sky
Spot is placed outside and the
controller is inside. You can switch the
lamp off without going outside.
7)
LEFT: Manually move Sky Spot Left
8)
RIGHT: Manually move Sky Spot Right
9)
Blackout: Shutter is closed.
10)
Open: Shutter open after blackout
11)
Focus No Function on Sky Rose 4000
12)
Reset the Sky Rose
13)
AUTO / MANUAL
7 8
14)
Min-Max Angle: Pan
15)
Speed: Parabolic Speed
9 10
11 12 13
14 15
