7
Ordercode: 50831
Showmaster 48 MKII
Backside
Fig. 02
34)
Power switch ON/OFF
35)
DC Input: DC 12-20V, 500 mA.
36)
MIDI Thru:
MIDI port, used for connection to a sequencer or a MIDI device.
37)
MIDI Out:
MIDI port, used for connection to a sequencer or a MIDI device.
38)
MIDI In:
MIDI port, used for connection to a sequencer or a MIDI device.
39)
DMX signal connector OUT:
This connector sends DMX signal to a DMX fixture or DMX pack.
40)
Audio Input:
This jack accepts a line level audio input signal, ranging from
100 mV to 1Vpp.
41)
Remote Input: BLACK OUT und FULL ON
may be controlled with a remote control using a standard
1/4" Stereo jack.
Installation
Remove all packing materials from the
Showmaster 48 MKII
. Check if all foam and plastic padding is
removed. Fit the equipment into a 19" rack. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Summary of Contents for Showmaster 48 MKII
Page 23: ...22 Ordercode 50831 Showmaster 48 MKII...
Page 24: ...2015 Showtec...
