13
Ordercode: 41304
Pixel Bar 12 MKII
Main Menu Options
Master/Slave mode
Sound control mode
Static color mode
Settings
Built-in Programs
Auto Run
DMX mode
The Pixel Bar 12 MKII will only show its version number at start-up !
1.
Master/slave mode
Master
01)
The default setting for this device is master.
02)
Only one fixture can be the master.
Note:
•
Disconnect the fixture from the DMX controller before master/slave operating, otherwise data
collisions may occur and the fixtures will not work properly!
•
In master/slave mode, the master fixture can execute the built-in programs, all the slave fixtures will
work the same.
•
When operating the master/slave chain, you can identify the master fixture from the slave fixtures
easily. The master doesn’t have any cable plugged into the DMX input connector.
Slave control
This function allows you to control the slaves from the master’s control panel in a master/slave setup.
01)
Only 1 fixture can be the master, the others have to be Slaves. The Default setting for a device is
Master. So on the first device you don’t have to change anything.
On the slave devices you must press the
Mode
button until the display shows
.
02)
All slave devices must have address
.
