17
Ordercode: 40207
Phantom 75 MKII LED Spot
3.3. Screen Reverse
01)
Press the
UP/DOWN
buttons to choose Screen Reverse.
02)
Press the
ENTER
button to open the menu.
03)
Press the
UP/DOWN
buttons to choose ON/OFF and press the
ENTER
button to confirm your choice.
04)
If you choose ON, the display will be reversed.
3.4. Pan Angle
01)
Press the
UP/DOWN
buttons to choose Pan Angle.
02)
Press the
ENTER
button to open the menu.
03)
Press the
UP/DOWN
buttons to choose between 3 options: 540°, 360° or 180°.
04)
Press the
ENTER
button to confirm your choice.
3.5. Tilt Angle
01)
Press the
UP/DOWN
buttons to choose Tilt Angle.
02)
Press the
ENTER
button to open the menu.
03)
Press the
UP/DOWN
buttons to choose between 3 options: 270°, 180° or 90°.
04)
Press the
ENTER
button to confirm your choice.
3.6. Sound Sensitivity
01)
Press the
UP/DOWN
buttons to choose Sensitivity.
02)
Press the
ENTER
button to open the menu.
03)
Press the
UP/DOWN
buttons to set the sound sensitivity. The adjustment range is between 001-100,
from low to high sensitivity.
04)
Press the
ENTER
button to save changes.
3.7. Reset
01)
Press the
UP/DOWN
buttons to choose Reset.
02)
Press the
ENTER
button to perform a full software reset. The fixture will switch off and on.
3.8. Factory Settings
01)
Press the
UP/DOWN
buttons to choose Factory Set.
02)
Press the
ENTER
button to perform a full software reset and restore the factory settings.
4. System Information
With this menu, you view the current parameters of your Phantom 75 MKII LED Spot.
01)
Press the
MODE
button, until the display shows
.
02)
Press the
ENTER
button to open the menu. The display will show:
03)
Now, it is possible to view the following pieces of information about the Phantom 75 MKII LED Spot:
Current software version
Current active mode
Current DMX address
Current device temperature
