SHOWTEC Performer 1500 Fresnel Daylight, User Manual

Page: 22 / 40

21
Performer 1500 Fresnel Daylight
Product code: 33132
6. Operation
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as a theater spot. It is suitable only for indoor installation.
This device is not suitable for households and for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency
match the input voltage, current and frequency specified on the information label on the device.
Control Modes
The Performer 1500 Fresnel Daylight supports the following control modes:
●
Stand-alone: Knob mode, Static
● Master/Slave: Knob mode, Static
● DMX-512, RDM 1, 2, 3, 6, 8 channels
For more information about how to connect the devices, refer to 5. Setup on pages 18–20.
To operate the device manually as a stand-alone device or in a master/slave setup:
● Adjust the functions by turning the rotatable controls (02) in Knob Mode menu. See 6.6.1. Knob Mode
on page 25 for more information.
● Adjust the levels for natural white and cool white in Static menu. See 6.6.2. Static on page 26 for
more information.
To operate the device with a DMX controller:
01) Set the DMX starting address of the device in the DMX Address menu. See 5.3.5. DMX Addressing on
page 20 and 6.6.3. DMX Address on page 26.
02) Select the DMX channel mode. See 6.6.5. Personality (DMX Channel Modes) on page 27 for more
information. See 6.7. DMX Channels on page 31 for complete overview of all DMX channels.