8
Troubleshooting
No Light
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit
operates properly, do not carry out following steps.
If the light effect does not operate properly, refer servicing to a technician.
Response: Suspect two potential problem areas: the power supply, the Lamp.
1.
Power supply. Check that the unit is plugged into an appropriate power supply.
2.
The Lamp. Replace the old lamp with a new one with the same specifications. See page 7 for
replacing lamp.
3.
If all of the above appears to be O.K., plug the unit in again.
4.
If you are unable to determine the cause of the problem, do not modify the Par 16, as this may
damage the unit and the warranty will become void.
5.
Return the device to your Showtec dealer.
Product Specification
Model: Showtec Parcan 16
•
Par 16
•
Lamp socket: GU5.3 or GX 5.3 (12V/24V)
•
Max. capacity: 50W
•
2 pole cable: 20 cm
•
Filterframe: Included
•
Dimensions: 145 x 107 x 120 mm (LxWxH)
•
Weight: 0,18 kg
Minimum distance:
Minimum distance from flammable surfaces: 0.5m
Minimum distance to lighted object: 1.3m
Design and product specifications are subject to change without prior notice.
Summary of Contents for Parcan 16
Page 11: ......
