10
2. Sound-controlled
When the LED Sphere is not connected by a DMX-cable, it functions as a stand-alone device.
When the display shows , the LED Sphere is sound-controlled.
CHE9: Red → Green → Blue → Red+Green → Red+Blue → Green+Blue → Red → Green, etc.
The LED Sphere will automatically change its color to the beat of the music.
However you are not able to adjust the audio sensitivity.
3. Manual Control
When the display shows , you are able to mix any color you want.
Press F/S to enter Manual Mode.
When you press the Up button, you are able to
manually mix any color you want.
The first digit of the display will move counter-clockwise.
When you press the Down button, you are only able to create a full color (Red, Green or Blue).
The first digit of the display will move clockwise.
4. Master/Slave Mode
1.
Use a 3-p XLR cable to connect the LED Sphere.
The pins:
1.
Earth
2.
Signal -
3.
Signal +
2.
Link the units as shown in (Fig. 3), Connect a DMX signal cable from the first unit's DMX "out"
socket to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
3.
Configure the Menu settings as follows
Master
Slave
You can use the same functions on the master device as described on page 9+10 (Built-in
Programs 1-8,
Music control and Manual Mode)
This means on the master device you configure several settings depending on your desired
operation Mode and all slave devices will react the same as the master device.
Multiple LED Spheres (
Master/Slave control)
Fig. 3
Summary of Contents for LED Sphere Direct Control 100 V2
Page 1: ...LED Spere Direct Control 100 V2 ORDERCODE 41127 ...
Page 18: ......
