6
MENU
DATA
INSTRUCTION
CHA
0-599
Set DMX Address
TOP
On / Off
Set the turns of display
CE
On / Off
Set 4 or 20 channels
DBL
On / Off
Under „PAT“ Mode, set time for segmentto fade away
LSG
1 To 4
Set the Chase Speed
LSE
On / Off
Set MASTER and SLAVE. ON = SLAVE
SLO
On / Off
Choose time for FAST or SLOW fader
SOU
On / Off
Sound-activated switch
SS
On / Off
Fader Effect switch
GKN
On / Off
Special Display switch 1
BAK
On / Off
Special Display switch 2
DMX controlling: Only when it is set up as slave, it can receive signal from DMX or master. When M/S is
applied, the masters cannot be connected otherwise the signal will interfere.
Stand-alone Operation
Press the Blackout button to view the menu. Set Master to OFF. (LSE = OFF)
DMX Operation
Press the MODE button to view the DMX address setting rnenu:
The DMX Channel functions when using the entire device as one:
Channel 1:
Red (0-255)
Channel 2:
Green (0-255)
Channel 3:
Blue (0-255)
Channel 4:
Dimmer (0-255)
The DMX Channel functions when using the each section separately:
Section1
Channel 1:
Red (0-255)
Channel 2:
Green (0-255)
Channel 3:
Blue (0-255)
Channel 4:
Dimmer (0-255)
Section2
Channel 5:
Red (0-255)
Channel 6:
Green (0-255)
Channel 7:
Blue (0-255)
Channel 8:
Dimmer (0-255)
Etc….etc.
The LED Bar DMX’s built-in controller will automatically detect the presence of a DMX signal.
IF a DMX signal is present, the blue LED display will blink.
In order to receive a DMX signal, the built-in controller must be attached to a DMX controller by a 3-pin DMX
cable and the DMX controller must be turned on.
To mix RGB color for the first section use channels 1, 2, 3, and for dimmer use channel 4.
Summary of Contents for LED Bar DMX
Page 1: ...LED Bar DMX ORDERCODE 41110...
Page 11: ...2005 Showtec...
