5
POWER
DMX
MASTER
SLAVE
Installation
Remove all packing materials from the
LED Bar DMX
. Check that all foam and plastic padding is removed.
Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Panel Functions
Pattern
Main Back
Blackout
Number Color Color
(press for Menu)
PATTERN Number: Modes can be selected and displayed on the segment.
MAIN Color:
Main colors can be selected and displayed on the segment.
BACK Color:
Background colors can be selected and displayed on the segment.
BLACKOUT / MENU: Different functions are available: long press = Blackout, short press = MENU.
Sound-Activated Mode
Data number for each color:
PATTERN NUMBER
MAIN COLOR
BACK COLOR
0 Automatic Light show
1 Bargraph
2 Peak Dot
3 Bargraph withTop Color
4 Peak Dot with Top Color
5 Bargraph Center-Out
6 Peak Dot Center-Out
7 Mobile
1 White
2 Red
3 Blue
4 Green
5 Yellow
6 Cyan
7 Orange
8 Magenta
9 UV Blue
0 Black (Off)
1 White
2 Red
3 Blue
4 Green
5 Yellow
6 Cyan
7 Orange
8 Magenta
9 UV Blue
Example:
023
on Display
This means the automatic lightshow is on (
0
), with Main Color Red (
2
) and Back Color Blue (
3
).
Summary of Contents for LED Bar DMX
Page 1: ...LED Bar DMX ORDERCODE 41110...
Page 11: ...2005 Showtec...
