16
Ordercode: 43725
Helix S5000 Q4
Multiple Helixes (Wireless DMX Control)
You can use the Helix in a wireless DMX setup. Make sure the device is operating in wireless DMX mode,
which can be set in the main menu (see pages 24-25 for more information).
Sweden 2.4GHz Wireless Communication Module
Communication distance:
depending on the transmitting power or transmitter module
Test conditions:
W-DMX TRx Transmitter module, 2dBi Antenna, transmitting power
20dBm (100mW)
Range indoor:
60 m (approx. through three concrete walls)
Range outdoor:
250 m
Wireless DMX Connection
The wireless receiving module “Nano G5 Receiver, 2.4GHz”, provided by Swedish WIRELESS SOLUTION,
only has a 2.4 GHz wireless signal receiving function. In order to establish a wireless connection, please
use the Wireless DMX BlackBox F-1 G5 Transceiver (50177) or the Wireless DMX BlackBox F-2 G5 Transceiver
(50178). To control the status of the wireless communication, please look at the green LED indicator light
on the left side of the display.
Note: When the Helix receives a wireless DMX signal, then this signal will also be present at its 5-pin DMX
output (03). However, the Helix has not been designed to send wireless signals. Therefore, always
connect the Helix devices to each other using a DMX cable.
Wireless DMX Problems
01)
No signal from the W-DMX transmitter.
The LED indicator will blink quickly.
02)
Proper connection with the W-DMX transmitter, but no DMX signal is present.
The LED indicator will blink slowly.
When the wireless DMX communication is unhindered and a DMX signal is present, the LED indicator will
always be on.
The Helix S5000 Q4 cannot receive a Wireless DMX signal
and a DMX cable signal at the same time
When the device is in Auto mode or Built-in Programs mode, please ensure that the paired 2.4GHz
wireless signal transmitter is OFF.
The Helix S5000 Q4 is only a WDMX receiver and never a WDMX transmitter
