7
Ordercode: 42771
Flexstrip Set IP44 RGB
Installation
Remove all packing materials from the
Flexstrip Set IP44 RGB
. Check that all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Connecting Flexstrip Set IP44 RGB
First you have to mount the Flexstrip on an aluminium or metal surface for best heat dissipation. Use the
3M tape on the underside to attach the Flexstrip on the surface. After mounting the Flexstrip follow the
next steps to connect the Flexstrip in order to operate the Flexstrip with the IR remote control.
Fig. 02
01)
Connect the RGB controller to the LED strip.
02)
Connect the power adapter to the RGB controller.
03)
Plug the power adapter into a proper electric power supply socket. Do not supply power before the
whole system is set up and connected properly.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Remote control
The remote control will sent a signal to the IR-sensor eye from the RGB controller, see figure 03.
Fig. 03
Summary of Contents for FLEXSTRIP SET IP4RGB
Page 12: ...2016 Showtec...
