33
Ordercode: 41391
Expression 8000 Spot
07)
Gently lift up the gobo holder 10º and then gently pull out the gobo from its position.
Fig. 08
08)
Very carefully take the gobo out of the gobo holder with a pair of pliers.
09)
Place the new gobo in the gobo holder. Carefully put the pinchcock back, gently press the
pinchcock a little bit together. To do it, you can use a pair of pliers.
10)
Put the gobo holder back. At first, you will notice some resistance which is caused by the way in
which the holder was built.
11)
Replace the maintenance caps and fasten all the screws.
Glass Gobo Orientation
Coated glass gobos are inserted with the coating against the rim of the holder (away from the spring).
Textured gobos are inserted with the smooth side against the spring. This provides the best results when
combining rotating gobos.
When an object is held up to the coated
side, there is no space between the object
and its reflection. The back edge of the
gobo cannot be seen when looking
through the coated side.
When an object is held up to the uncoated
side, there is a space between the object and
its reflection. The back edge of the gobo can
be seen when looking through the uncoated
side.
