SHOWTEC EventBAR 100IR, Manual

Page: 17 / 32

16
Ordercode: 44100
EventBAR 100IR
Main Menu Options
Auto Run
Built-in Programs
Slave
DMX mode
Sound controlled
Color
Power mode
Auto Run Program
With this menu you can set the Auto run mode of the EventBAR 100IR.
01) Press the Mode button on the device, until the display shows .
02) The EventBAR will start automatically with its auto program.
Built-in Programs
With this menu you can choose a built-in program.
01) Press the Mode button on the device, until the display shows .
02) You can choose 20 built-in programs , by using the Up and Down buttons.
03) If you choose and you press Setup you can choose between 9 programs and Off with the
Up and Down buttons.
04)
Press Setup again and you can set the strobe value by using the Up and Down buttons.
05) Press the Mode button to go back to .
06) With the Up and Down buttons you can choose between .