16
Ordercode: 42197
LED Lightbar 12 Pixel
Static Color Mode
With this menu you can create a static color.
01)
Press the
Mode
button, until the display shows
.
02)
Press the
Setup
button to make a color.
03)
With this sub menu you can set 4 static colors of the LED Lightbar 12 Pixel.
You can choose
Red
,
Green, Blue
or
White
by pressing the
Setup
button.
Use the
Up / Down
buttons to set the values of each individual color from 000-255.
Settings
With this menu you can set the DMX fail of the LED Lightbar 12 Pixel and you can see the temperature.
01)
Press the
Mode
button, until the display shows
.
02)
Use the
Setup
button to choose
.
03)
Press the
Setup
button again and use the
Up
and
Down
buttons to choose between
mode
and
mode.
01)
When you choose
, the LED Lightbar 12 Pixel will remember the last settings and will not go
out if there is no DMX signal.
04)
When you choose
, the LED Lightbar 12 Pixel will go out if there is no DMX signal.
05)
Press the
Setup
button again and the display will show
.
06)
Press
Setup
again and you can see the actual temperature
.
07)
If the temperature is too high, the display will show
.
Reset factory settings
Switch the power off and hold at the same time the
Mode
and
Up
button.
Switch the power on for 5 seconds and release the
Mode
and
Up
button.
The LED Lightbar 12 Pixel will reset to the factory settings. The fixture will start up in the Auto Run mode.
