8
Ordercode: 30268
Compact Power Lightset MKII
Backside
Fig. 01
01)
7x 3W RGB LEDs (1 spot)
02)
Ground/Earth connection
03)
IEC Power In + Fuse 1A / 250V
04)
Menu B LED display
05)
Footswitch input
06)
DMX
signal connector (IN) 3-pin
07)
DMX signal connector (OUT) 3-pin
Installation
Remove all packing materials from the Compact Power Lightset MKII.
Check that all foam and plastic padding is removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.
