SHOWTEC Candela Pix 100, Manual

Page: 16 / 28

15
Ordercode: 41281
Candela Pix 100
08) Press the UP/DOWN buttons to set the desired strobe frequency. The adjustment range is between
, from OFF to high strobe frequency.
09) If you choose , press the UP/DOWN buttons to set the program speed and
strobe frequency.
10) If you choose the program speed , press the SET button to open the submenu.
11) Press the UP/DOWN buttons to set the desired program speed. The adjustment range is between
, from slow to fast.
12) If you choose the strobe frequency , press the SET button to open the submenu.
13) Press the UP/DOWN buttons to set the desired strobe frequency. The adjustment range is between
, from OFF to high strobe frequency.
5. Master/slave
In this menu you can set the device as a slave.
01)
While in main menu, press the UP/DOWN buttons until the display shows Slave.
02) Press the SET button to open the menu, the display will show:
03) If you choose Yes, the device will become a slave device.
04) If the device has been set to slave, it will react the same as its master device.
05) If you choose No, it is automatically classified as a master device.
06) Press the SET button to confirm your choice.
6. Settings
In this menu you can set several settings of the device.
01)
While in main menu, press the UP/DOWN buttons until the display shows Settings.
02) Press the SET button to open the menu, the display will show:
03) Press the UP/DOWN buttons to scroll between the following menus: Curves Select, Pixel Invert, PWM
Frequency, DMX Fail, DMX Sync, Lock, Key Back Light and Factory.