background image

 

IMPORTANT:

 

The manufacturer will not accept liability for any resulting damages caused by the non-
observance of this manual or any unauthorized modification to the device. 

 

 

Never let the power-cord come into contact with other cables! Handle the power-cord and all 
connections with the mains with particular caution! 

 

Never remove warning or informative labels from the unit. 

 

Never use anything to cover the ground contact. 

 

Never aim the output directly at people. 

 

Never aim the output at open flames. 

 

Never add flammable liquids of any kind (oil, gas, perfume) to the bubble liquid.

 

 

Never drink bubble liquid. If it is ingested, call a doctor immediately.  If bubble liquid comes in 
contact with skin or eyes, rinse thoroughly with water.

 

 

Never lock smoke-filled rooms. Risk : panic among the locked persons!

 

 

Do not insert objects into air vents. 

 

Do not open the device and do not modify the device. 

 

Do not connect this device to a dimmerpack. 

 

Do not switch the device on and off in short intervals, as this would reduce the device’s life. 

 

Do not shake the device. Avoid brute force when installing or operating the device. 

 

Only use device indoor, avoid contact with water or other liquids. 

 

Only use the high-quality bubble liquid, that your Showtec dealer recommends.(5L bubble fluid 
ordercode 80360) Other bubble liquids may cause poor effect bubbles or eye irritation. 

 

Avoid flames and do not put close to flammable liquids or gases. 

 

Always make sure there is sufficient liquid in the fog liquid tank. 

 

Always allow free air space of at least 20 cm around the sides and top of the unit. 

 

Always drain tank before shipping or otherwise transporting this unit. 

 

Always keep the bubble machine upright. 

 

Always unplug your SHOWTEC Bubble machine before filling its tank. 

 

For adult use only.  Bubble machine must be installed out of the reach of children. Never leave 
the unit running unattended. 

 

Always disconnect power from the mains, when device is not used or before cleaning ! Only 
handle the power-cord by the plug. Never pull out the plug by tugging the power-cord. 

 

Make sure that the available voltage is not higher than stated on the rear panel. 

 

Make sure that the power-cord is never crimped or damaged. Check the device and the power-
cord from time to time. 

 

Make sure that the core diameter of extension cords and power cords is sufficient for the required 
power consumption of the device. 

 

The cable insert or the female part in the device must never be strained. There must always be 
sufficient cable to the device. Otherwise, the cable may be damaged which may lead to deadly 
electrical shocks. 

 

If the external cable is damaged, it has to be replaced by a qualified technician. 

 

If device is dropped or struck, disconnect mains power supply immediately. Have a qualified 
engineer inspect for safety before operating. 

 

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do 
not switch it on immediately. The arising condensation water might damage your device. Leave 
the device switched off until it has reached room temperature. 

 

If your Showtec Bubble machine fails to work properly, discontinue use immediately.  Drain all 
bubble liquid from the tank, pack the unit securely (preferably in the original packing material), 
and return it to your Showtec dealer for service. 

 

For replacement use fuses of same type and rating only. 

 

The use of bubble fluid is only allowed for adults. 

 

Repairs, servicing and electric connection must be carried out by a qualified technician. 

 

The user is responsible for correct positioning and operating of the 

Atmos B120 Bubble Machine

The manufacturer will not accept liability for damages caused by the misuse or incorrect 
installation of this device. 

 

This device falls under protection class I. Therefore it is essential to connect the yellow/green 
conductor to earth. 

 

Every bubble-filled room must be overseen by a skilled person. 

 

Be careful : surroundings become slippery due to the bubbles. 

 

WARRANTY: Till one year after date of purchase.

 

 

Summary of Contents for Atmos B120


















Reviews: