20
51329
Galactic RGB850
Create a show
01)
In the ANIMA folder are 3 ILDA files; ANIMA1.ild, ANIMA2.ild and ANIMA3.ild.
02)
If you want to create your own show, you shoud create a text file with the following context:
ANIMA1.ild,12,3
ANIMA2.ild, 20,1
ANIMA3.ild, 18, 4
03)
Save this TXT file with the name ANIMA.TXT.
04)
Change the extension from the TXT file into PRG.
Explanation: ANIMA1.ild,12,3
ANIMA1.ild is the ILDA program name.
Number 12 is the scanner speed.
Number 3 is the number of shows which will be repeated.
3. DMX address
In this menu you can set the DMX address.
01)
Press the FUNC button until the display shows
.
02)
Press the UP/DOWN buttons to choose the desired DMX address, the adjustment range is between
.
03)
Set the desired DMX address and press the ENTER button to confirm.
4. Slave mode
In this menu you can set the device as a Slave.
01)
Press the FUNC button until the display shows
.
02)
Press the ENTER button to confirm.
03)
If the device has not been set to slave, it is automatically classified as a master device. If the device
has been set to slave, it will react the same as its master device.
5. Settings
In this menu you can set several settings.
01)
Press the FUNC button until the display shows
.
02)
Press the UP/DOWN buttons to choose between 3 submenus:
03)
Press the ENTER button to confirm the desired submenu.
04)
In the color menu you can choose between 3 options:
