10
2.2.3 Erase All Programs
Tap 2X
1) Record enable.
2) Press and hold the Record button.
3) Tap the Flash buttons 1, 4, 2 and 3 in sequence while holding the Record button. All LEDs will flash,
indicating all programs stored in memory have been erased.
2.2.4 Clear a Scene or Scenes
1) Record enable.
2) Record a scene or scenes.
3) If you are not satisfied with the scene or scenes, you may tap the Rec Clear button
while pressing and holding the Record button, all LEDs will flash, indicating
the scenes have been cleared.
2.2.5 Delete a Step or Steps
1) Enter the Edit mode.
2) Tap the Step button to scroll to the step you wish to delete.
3) Tap the Delete button when you reach to the step you wish to delete, all LEDs will
flash briefly indicating the deletion of the step.
4)
Continue steps 2 and 3 until all the unwanted steps have been deleted.
5) Tap the Rec Exit button while pressing and holding down the Record button,
the Scene LED goes out, indicating the exit of Edit mode.
Summary of Contents for 50335
Page 1: ...Showmaster 24 ORDERCODE 50335 ...
Page 24: ...2007 Showtec ...
