Ordercode: 43539
Spectral ZP-5
2. Color Macros/Zoom
With this menu you can set the device’s color temperature and zoom.
01)
In the main menu, press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to open the menu.
03)
Press the UP/DOWN buttons to toggle between the 2 following options:
Color Macros
Zoom
04)
When the display shows
, press the ENTER button to open the menu.
05)
Press the UP/DOWN buttons to choose the desired color macro. See page 21, channel 6 for the full list
of the available macros.
06)
When the display shows
, press the ENTER button to open the Zoom settings.
07)
Press the UP/DOWN buttons to set the zoom factor. The adjustment range is between 0-255, from OFF
to full zoom.
3. Built-in programs
With this menu, you can set the built-in programs.
01)
In the main menu, press the UP/DOWN buttons until the display shows
and press the ENTER
button to open the menu.
02)
Press the UP/DOWN buttons to choose one of the 10 uneditable built-in programs (AT.01-AT.10) and
10 editable presets (PR.01-PR.10) which can be edited in Edit mode (see page 17).
03)
Press the ENTER button to activate.
04)
The device will now run the desired built-in program.
4. Master/Slave Mode
With this menu, you can set the device as a slave.
01)
In the main menu, press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to open the menu.
03)
Press the UP/DOWN buttons to toggle between the 2 following options:
DMX/Master Mode
Slave Mode
04)
When the display shows
, the display is operating in DMX/Master Mode.
05)
When the display shows
, the device is operating in Slave Mode. It means that it will react the
same as the master device.
5. DMX-512 Mode
With this menu, you can set the DMX address.
01)
In the main menu, press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to open the menu.
03)
Press the UP/DOWN buttons to choose the desired DMX address. There are 512 available DMX
addresses to choose from.
16
