SHOWTEC 42567, Manual

Page: 15 / 28

14
Ordercode: 42567
Wipe Out 3W
04) Press the SETUP button to enter the desired menu.
05) When the display shows , press the SETUP button to enter the LED speed settings.
06) Press the UP/DOWN buttons to increase/decrease the LED speed. The adjustment range is between
, from slow to fast.
07) When the display shows , press the SETUP button to enter the flash frequency settings.
08) Press the UP/DOWN buttons to increase/decrease the flash frequency. The adjustment range is
between , from low to high frequency.
09) Press the MODE button until you return to step 3 and press the UP/DOWN buttons until the display
shows .
10) Press the SETUP button to open the manual settings.
11) Press the UP/DOWN buttons to choose one of the 2 options:
LED brightness
LED flash frequency
12) When the display shows , press the SETUP button to enter the LED brightness settings.
13) Press the UP/DOWN buttons to increase/decrease the brightness. The adjustment range is between
, from dark to brightest.
14) When the display shows , press the SETUP button to enter the flash frequency settings.
15) Press the UP/DOWN buttons to increase/decrease the flash frequency. The adjustment range is
between , from low to high frequency.
1.2. Bar Menu
01) Press the MODE button until you return to page 13, 1. Auto Run Mode , step 03).
02) Press the UP/DOWN buttons until the display shows .
03) Press the SETUP button to enter the BAR Menu.
04) Press the UP/DOWN buttons to choose one of the 2 following options:
Automatic BAR movement
Manual BAR movement
05) When the display shows , press the SETUP button to enter the automatic BAR movement
speed settings.
06) Press the UP/DOWN buttons to increase/decrease the movement speed. The adjustment range is
between , from slow to fast.
07) When the display shows , press the SETUP button to enter the manual motor movement
settings.
08) Press the UP/DOWN buttons to choose one of the 2 following options:
Left motor settings
Right motor settings
09) When the display shows , press the SETUP button to enter the left motor settings.
10) Press the UP/DOWN buttons to adjust the position of the left motor. The adjustment range is between
.
11) When the display shows , press the SETUP button to enter the right motor settings.