SHOWTEC 41394, Manual

Page: 35 / 44

34
Ordercode: 41394
Expression 550S
Gobo Size
01) Disconnect mains power supply and set the switch to OFF.
02) Make sure that the gobo which you want to insert has the same size. For the right size, see below.
Fig. 06
Replacing a gobo from the rotating gobo wheel
Fig. 07
01) Before removing the top part of the housing, make sure that the moving head is in the horizontal
position. The lens position should be on the bottom, symmetrically speaking.
02) Loosen all four screws on the fan housing.
03) Loosen the four screws on both sides of the top cover
04) Gently tilt the head so that the small metal housing slides out easily.
05) Turn the gobo wheel until you reach the gobo which you want to remove.