14
Ordercode: 40292
Ignitor-6 Section Strobe
1. DMX Address
With this menu you can set the DMX-address.
01)
In main menu, press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to enter the submenu.
03)
Press the UP/DOWN buttons to choose the desired DMX address.
The adjustment range is between
.
2. Master/Slave Mode
With this menu you can set the device as a Slave.
01)
In main menu, press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to enter.
03)
Press the UP/DOWN buttons to choose one of the 2 options:
Slave 1
Slave 2
04)
When the display shows
, the device is a slave device. It will now react the same as its master.
05)
When the display shows
, the device is a slave device. But it will react the opposite as its
master. So when the master device goes right, the slave device goes left.
3. Channel Mode
With this menu you can choose a DMX configuration.
01)
In main menu, press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to enter.
03)
Press the UP/DOWN buttons to choose one of the 2 options:
3 Channels
8 Channels
4. Sound control Mode
With this menu you can activate the built-in Sound-controlled program.
01)
In main menu, press the UP/DOWN buttons until the display shows
.
02)
Press the ENTER button to enter. The display shows
.
03)
Turn on the music and the
Ignitor-6 Section Strobe
will react to the beat of the music
.
