14
Ordercode: 30751
Sunstrip Active MKII 110V
1.2 DMX configuration
01)
Press the Menu button (in DMX Mode), until the display shows
.
02)
You can choose 4 different DMX configurations.
03)
Press the Up/Down buttons to select the required DMX configuration.
1 DMX channel
2 DMX channels
5 DMX channels
10 DMX channels
Note: To change this option, the display has to blink.
2. Chase Mode
With this mode you can choose a built-in chase program, set the direction of the chase, set the speed of
the chase and set the dimmer of the chase.
2.1 Chase program
01)
To activate the chase programs, you have to set the dimmer between
.
02)
Press and hold the Mode button for 5 seconds until the display starts blinking.
03)
Press the Mode or Menu button, until the display shows
.
04)
You can choose 16 different built-in programs, auto or full.
05)
Press the Up/Down buttons to select the required built-in program from
.
06)
If you choose
program, the device will start with its built-in chases 1-16 in sequence.
07)
If you choose
, all 10 LEDs will light up and remain On at 100% output.
Note: To change this option, the display has to blink.
2.2 Chase direction
01)
Press the Menu button (in Chase Mode), until the display shows
.
02)
You can choose
or
.
03)
Press the Up/Down buttons to select the required direction.
04)
If you choose
, the chase will start in the regular direction.
05)
If you choose
, the chase will start in the reverse direction.
Note: To change this option, the display has to blink.
2.3 Chase speed
01)
Press the Menu button (in Chase Mode), until the display shows
.
02)
Press the Up/Down buttons to select the required speed.
03)
Set the speed between
.
Note: To change this option, the display has to blink.
2.4 Chase dimmer
01)
Press the Menu button (in Chase Mode), until the display shows
.
02)
Press the Up/Down buttons to select the required light intensity.
03)
Set the intensity between
.
Note: To change this option, the display has to blink.
