16
3
2.3
The control station setting of connecting DMX512
The DMX console and the lamp body are connected in series.
Because the Std.P MODE is five channels, the address code of the lamp increases by
5 times such as(1,6,11,16…),also each it can be reused as needed.
The DMX address code can be any value between 001and 512.
DIM4
ZOOM、FOCUS、GOBO RESET
NO FUNCTION
185
209
210
234
235
255
ECLIPSE COLOR IP
SS857
®
2.1 Mounting
2
Installation
The fixture can be mounted in any
position.Always ensure that
mounting surface can withstand 10
times the weight of thefixture.
Always use a safety cable when
mounting the fixture in any elevated
position.
Important safety note!!
Always use a safety cable when installing this unit!!
Be sure that the safety cable is connected to a solid load-bearing structure.
2.2 Power connections
This product uses input and output power cable is 1.5 square mm copper wire
Note:
If the signal cable is over 60m between the DMX512 controller and fixture or beween two
fixtures, then a DMX signal amplifier is needed as well.
CHANNEL
VALUE
FUNCTION
UPRIGHT
