background image

 

Caution 

Please observe the following basic instructions in order not to endanger yourself or others 
and to avoid damage to external devices. 

 

 

Warnings 

Do not disassemble or modify the product. This could result in injury from electric shock.  
If you notice that the power cord shows obvious signs of wear, the appliance is 
malfunctioning, smells burnt or smokes, immediately unplug the appliance from the wall 
outlet and refer servicing, maintenance or repair to an authorised service centre or your 
dealer. 
Before cleaning the product, you should turn it off and disconnect it from the power supply. 
Always place the product on a flat, stable surface to ensure a secure stand. 
Do not use the product in a damp or wet environment. 
Do not place containers filled with liquids, such as vases, glasses or bottles, on the product. 
Do not place small objects on top of it that could slide in, such as hairpins, sewing needles or 
coins. 

 

 

Precautions 

To avoid damage to the product, do not place it in places with high temperatures or a lot of 
dust, do not place it directly next to an air conditioner and avoid direct sunlight. 
Do not place the article near other electrical equipment to avoid interference. 
Do not use force when handling the product or place heavy objects on it. 
Disconnect the power supply if you are not going to use the device for a longer period of 
time. To disconnect the power, pull the plug, not the cable. 
Please handle the power cable with care. It should not be near radiators, do not place heavy 
objects on it and lay it in such a way that no persons can step on it or fall over it. 

 

 

Mains voltage 

 

If an external power supply unit is required for use, connect it to an outlet with the correct 
voltage. 
Do not connect the device to a different mains voltage than that for which your product is 
intended. 
Unplug the power cord from the wall outlet when not using the product or when there is a 
thunderstorm. 

 

 

Summary of Contents for MEL-4











Reviews: