Showline SL Strip 400 RGBW Led Luminaire, User Manual

Page: 9 / 36

Connecting Power
7
SL STRIP 400 RGBW LED Luminaires
Installation & User’s Manual
Sh wline
Connecting SL STRIP 400 RGBW LED Luminaires to AC Power
If the unit is supplied with an AC input cable without an input connector installed. The input connector is a user-
supplied accessory.
Table 2 describes how to connect power to your SL STRIP 400 RGBW LED Luminaire. Field wiring of the SL
STRIP 400 RGBW LED Luminaire is straight forward. A total of 3 wires/conductors is supplied from the unit. The
following wiring scheme is used:
Table 2:
SL STRIP 400 RGBW LED Luminaire (IP65 Rated Models) AC Input Connections
Figure 3: SL STRIP 400 RGBW LED Luminaire AC Input & Output Connections
CAUTION:
In the event the AC input cable of this luminaire is damaged, it must be replaced, by the user, with an
approved cable through an Authorized Showline Dealer or Service Center.
Wire Color Purpose
Brown Main / Line (100 to 240VAC)
Blue Neutral
Green/Yellow Ground (Earth)
Bottom of Unit
AC Input
AC Output