Installation & User’s Manual
SL NITRO 510C LED STROBE Luminaire
2 6
DMX CONTROL
Sh wline
3
Color Presets
0 - 255
0 - 100%
0
CONTINUED FROM PREVIOUS PAGE
Chase1 DMX 202 - 204
Chase2 DMX 205 - 207
Chase3 DMX 208 - 210
Chase4 DMX 211 - 213
Chase5 DMX 214 - 216
Chase6 DMX 217 - 219
Chase7 DMX 220 - 222
Chase8 DMX 223 - 225
Chase9 DMX 226 - 228
Chase10 DMX 229 - 231
User Chase1 DMX 232 - 234
User Chase2 DMX 235 - 237
User Chase3 DMX 238 - 240
User Chase4 DMX 241 - 243
User Chase5 DMX 244 - 246
User Chase6 DMX 247 - 249
User Chase7 DMX 250 - 252
User Chase8 DMX 253 - 255
4
Strobe Effects
0 - 255
0 - 100%
0
Controls strobe operation as follows:
No Effect = DMX 0 - 5
(default)
Ramp Up = DMX 6 - 42
Ramp Down = DMX 43 - 85
Ramp up/down = DMX 86 - 128
Random = DMX 129 - 171
Top row only = DMX 172 - 173
Bottom row only = DMX 174 - 175
Left zone only = DMX 176 - 178
Center zone only = DMX 179 - 180
Right zone only = DMX 181 - 182
Checker pattern A = DMX 183 - 184
Checker pattern B = DMX 185 - 186
Random zones = DMX 187 - 214
Circle zone chase CW = DMX 215 - 235
Circle zone chase CCW = DMX 236 - 255
5
Intensity Timing
0 - 255
0 - 100%
255
Allows for timing control of intensity. Channel
should default to 255 for smoothest actions using
console and/or manual
fades.
6
Color Timing
0 - 255
0 - 100%
255
Allows for timing control of color parameters.
Channel should default to 255 for smoothest
actions using console and/or manual
fades.
7
Control Channel
0 - 255
0 - 100%
0
Control channel operation. Set control channel
value to desired action, hold value for at least 5
seconds, then turn to 0. Set control channel
value to 0 without any scaling.
Default Setting on Console = DMX 0-4
Dimming Curve_linear = DMX 30 - 34
Dimming Curve_Square = DMX 35- 39
Dimming Curve_S-Curve = DMX 40 - 44
Dimming Curve_PL-Curve = DMX 45 - 49
Calibration_OFF = DMX 70 - 74
Calibration_ON = DMX 75 - 79
Fan_Auto = DMX 80 - 84
Fan_Off = DMX 85 - 89
The following is only available for "Zones
Mapping" protocol. The following is instantly
applied and DOES NOT require the 5 second
hold.
Combined zone control - (all zones follow zone 1
setting) = DMX 100 - 104
The following is only available for "2 Zones
Modes". The following is instantly applied and
does not require the 5 second hold:
Linear Pattern = DMX 105 - 108*
Checker Pattern = 109 - 112*
*See
.
Not Used = DMX 113 - 250
(Reserved for future
use)
Table 11: DMX Channel Mapping (RGBW Full Mode)
Summary of Contents for SL NITRO 510C
Page 1: ...SL NITRO 510C RGB W LED Strobe Luminaire ...
Page 56: ......
