Showline SL NITRO 510C Installation And User Manual Download Page 12 | Manualshive

Page: 12 / 56

background image

Installation & User’s Manual

SL NITRO 510C LED STROBE Luminaire

1 0

INSTALLATION AND SET UP

Sh wline

provided M9 holes. It is recommended (and may be required by local and national safety codes) to use and install a
safety cable (sold separately). When hanging the fixture, be sure to leave enough space around the luminaire to allow
proper, uninterrupted airflow for cooling and positioning.

Figure 7: Mounting Luminaire

5. Connecting & Mounting Multiple Luminaires

SL NITRO 510C LED STROBE Luminaires include a built-in Quick Connect system that allows the luminaires to be
physically connected together while retaining perfect pixel pitch. Units may be connected in top-to-bottom or side-
by-side to allow for a wide range of configurations. In addition, they may be connected together with the SL BAR
520 RGBW LED luminaire.

Note:

The SL NITRO 510C LED STROBE Luminaire and SL NITRO 510 LED Strobe Luminaire share the same

chassis and can be combined together (or substituted for each other) as shown in this section of the manual.

SAFETY CABLE:

Is sold separately and

recommended for all hanging installation
and may be required by national and local
codes. Use safety cable anchor points for
safety cable attachment for this fixture.

Mounting

Hook / Clamp

Mounting holes
are M13.

Note:

(sold separately)

Yoke Plate

Point (2 ea.)

Mounted with Yoke Plate*

Mounted without Yoke Plate

Accessory

Hooks / Clamps

(sold separately)

SAFETY CABLE:

Is sold separately and

recommended for all hanging installation
and may be required by national and local
codes. Use safety cable anchor points for
safety cable attachment for this fixture.

*Each SL NITRO 510 LED STROBE luminaire
includes an accessory Yoke Plate. This can be added
to the luminaire to allow hanging with a single clamp.

Bolt (x4)

Flat Washer (x4)

Lock Washer (x4)

Nut (x4)

Yoke Plate

«
...
10
11
12
13
14
...
»

Summary of Contents for SL NITRO 510C

























































Reviews:

No comments

Related manuals for SL NITRO 510C

Brand: Keiser Pages: 2

Brand: ECA Pages: 3

Brand: Nautilus Pages: 12

Brand: Modulate Pages: 2

Brand: Zenbooth Pages: 60

Brand: ParaBody Pages: 5

Brand: Pari Pages: 12

Brand: laerdal Pages: 2

Brand: laerdal Pages: 104

Brand: laerdal Pages: 33

Brand: laguna Pages: 16

Brand: Lafayette Pages: 2

Brand: Vag Pages: 10

Cell Saver Elite+

Brand: Haemonetics Pages: 230

MIAMI J ADVANCED

Brand: Össur Pages: 35

Brand: Össur Pages: 38

Brand: Össur Pages: 8

Brand: Össur Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands