SL BEAM 300 FX
2
About Quickstart Guide
Included Items
Each SL BEAM 300 FX includes the following items:
Figure 1
:
Included Items
Warnings and Notices
When using electrical equipment
,
basic safety
precautions should
always
be
followed including
the
following
:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
.
D o n o t use outdoors
.
D o n o t mount near gas or electric heaters.
E q u i p ment should be mounted in locations and at heights where it will not readily be subjected to tampering by unauthorized personnel.
T h e u se of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
D o n o t use this equipment for other than intended use.
R e f e r service to qualified personnel.
SAVE THIS DOCUMENT FOR FUTURE REFERENCE! READ COMPLETELY BEFORE INSTALLING AND USING PRODUCT!
WARNING
:
You
must
have
access
to
a
main
circuit
brea ker or other
power
disconnect device before installing
any
wiring
.
Be
sure that
power is disconnected by removing fuses or turning the main circuit breaker off before installation. Installing the device with power on may
expose you to dangerous voltages and damage the device. A qualified electrician must perform this installation.
WARNING:
Refer to National Electrical Code
®
and local codes for cable specifications
.
Failure
to
use proper cable can result in damage
to
equipment or danger to personnel
.
WARNING:
This equipment is intended for
installation
in
accordance with
the
National
Electric Code
®
and
local regulations
.
It
is
also
intended
for
installation in indoor applications
only
.
Before any
electrical work is performed
,
disconnect power
at
the
circuit
breaker or
remove the fuse to avoid shock or damage to the control. It is recommended that a qualified electrician perform this installation.
Service and Maintenance
For all service and maintenance issues, please contact your local Showline office or an Authorized Service Center.
Power Requirements
The SL BEAM 300 FX operates on AC input voltages from 100 to 240 VAC.
SL BEAM 300 FX
QuickStart Guide
AC Input Cable 1.5M
Omega Mounts
(
this
document
)
This Quickstart Guide is intended for a knowledgeable user to unpack, install, and use SL BEAM 300 FX in a short time period. For the complete
manual in PDF format, please visit our web site at :
and click the user manual download link on the product page. The
www.philips.com/showline
complete manual provides you all information related to accessories, menu structures, DMX channel mapping/modes,and care for your new luminaire.
SL BEAM 300 FX
Q
UICK
S
TART
G
UIDE
QuickStart Guide
WARNING: This unit does not contain an ON/OFF switch. Always disconnect power input cable to completely remove power from unit when not in use.
Summary of Contents for SL BEAM 300 FX
Page 1: ...SL BEAM 300 FX ...
