10
Ordercode: 950105
VIBE FX Image Spot
Troubleshooting
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit
operates properly, do not carry out following steps.
No Light
If the light effect does not operate properly, refer servicing to a technician.
Suspect two potential problem areas as: the power supply and the LEDs.
01)
Power supply. Check if the unit is plugged into an appropriate power supply.
02)
The LEDs. Return the Image Spot to your Showgear dealer.
03)
If all of the above appears to be O.K., plug the unit in again.
04)
If you are unable to determine the cause of the problem, do not open the Image Spot, as this may
damage the unit and the warranty will become void.
05)
Return the device to your Showgear dealer.
Problem
Probable cause(s)
Remedy
The fixture does
not function at all
No power to the fixture.
Check if power is switched on and
cables are plugged in.
Internal fuse blown.
Disconnect fixture and return to your
dealer.
No light or LEDs
cuts out
intermittently
Fixture is too hot.
Allow fixture to cool.
Turn up the air conditioning .
LEDs damaged
Disconnect fixture and return to your
dealer.
The power supply settings do not
match local AC voltage and
frequency.
Disconnect fixture. Check settings and
correct if necessary.
Product Specifications
Model:
Showgear VIBE FX Image Spot
Input voltage:
100-240V AC 50/60Hz; 12V DC via the supplied adapter (IP-44)
Power consumption:
11W
Dimensions:
180 x 132 x 155 mm (LxWxH)
Weight:
0,7 kg
Electro-mechanical effects:
Light source:
1 x 7W White LED
Light output:
1200 Lumen
Gobos:
6
Gobo size:
35 mm
Focus:
Manual
Housing:
Metal & flame-retardant plastic
Control modes:
Manual, Timer
IP rating:
IP-54
Max. ambient temperature t
a
:
40°C
Max. housing temperature t
B
:
70°C
Minimum distance:
Minimum distance from flammable surfaces:
0,5 m
Minimum distance to lighted object:
1 m
Design and product specifications are subject to change without prior notice.
