background image

 

 

 

20 

 

  

 

 

RainDome 40 cm 

Product code: 71325 

6.

 

Troubleshooting 

This troubleshooting guide contains solutions to problems which can be carried out by an ordinary 
person. The device does not contain user-serviceable parts. 

Unauthorized modifications to the device will render the warranty void. Such modifications may result in 
injuries and material damage. 

Refer servicing to instructed or skilled persons. Contact your Highlite International dealer in case the 
solution is not described in the table. 

Problem 

Probable cause(s) 

Solution 

The device does not 
function at all 

No power to the device 

 

Check if power is switched on and 
cables are plugged in 

Internal fuse is blown 

 

Return the device to your Showgear 
dealer 

The power supply settings do not 
match local AC voltage and 
frequency 

 

Disconnect the device. Check the 
settings and correct, if necessary 

The stage luminaire 
does not function at 
all 

No power to the stage luminaire 

 

Check if cables are plugged into the 
stage luminaire 

 

Check if the plastic sleeve is installed 
correctly 

 

Check if the plastic sleeve is fully 
inflated 

 

Follow the instructions from the user 
manual of the stage luminaire 

The plastic sleeve 
does not inflate 
correctly 

The plastic sleeve is damaged 

 

Return the plastic sleeve to your 
Showgear dealer 

 

Install a new plastic sleeve 

The plastic sleeve is not installed 
correctly 

 

Check if the hook-and-loop fastener of 
the plastic sleeve is attached tightly to 
the hook-and-loop fastener (09) of the 
device, without openings 

7.

 

Maintenance 

 

Safety Instructions for Maintenance 

 

DANGER 
Electric shock caused by dangerous voltage inside
 

Disconnect power supply before servicing or cleaning. 

 

Preventive Maintenance 

 

Attention 
Before use, examine the device visually for any defects. 

Make sure that: 

 

All screws used for installing the device or parts of the device are tightly fastened and are not 
corroded. 

 

The safety devices are not damaged. 

Summary of Contents for 71325

























Reviews: