Showgear 50667, User Manual

Page: 12 / 16

11
PSA-125A4C
Product code: 50667
4. Installation
Safety Instructions for Installation
WARNING
Incorrect installation can cause serious injuries and damage of property.
Installation must be carried out only by instructed or skilled persons.
Follow all applicable European, national and local safety regulations concerning electrical installations.
Attention
Make sure there is enough space for ventilation around the device.
Installation Site Requirements
● The device must be installed only indoors.
● The device can be placed on a flat surface or mounted in a standard 19-inch rack.
● The maximum ambient temperature t
a
= 35 °C must never be exceeded.
● The relative humidity must not exceed 50 % with an ambient temperature of 35 °C.
Rack Mounting
The device can be mounted in a standard 19-inch rack. The device requires 6 rack units (RU) of space.
1 rack unit is 44,45 mm high.
Make sure that the rack is sufficiently secured to prevent it from becoming unstable or falling over.
To mount the device in a two-post rack, follow the steps below:
01) Insert 4 cage nuts in the openings on the rack posts where you want to mount the device.
02) Position the device in front of the rack posts so that the 4 mounting openings on the flanges face the
openings on the rack posts with cage nuts.
03) Using a screwdriver, mount the device to the rack posts with 4 screws.
Connecting to Power Supply
DANGER
Electric shock caused by short-circuit
The device accepts AC mains power at 400 V and 50/60 Hz. Do not supply power at any other voltage or
frequency to the device.
This device falls under IEC protection class I. Make sure that the device is always electrically connected
to the ground (earth).
Before connecting the device to the socket-outlet:
●
Make sure that the power supply matches the input voltage specified on the information label on
the device.
● Make sure that the socket-outlet has ground (earth) connection.
Connect the device to the socket-outlet with the power plug or a 3 x 125 A CEE H07RN-F cable.