- 5 -
Installation
This machine can be easily moved with the equipped casters. However, use the
stoppers on the front wheels to lock the machine during operation. In addition, avoid
operation on a slope. When moving this machine, move it slowly on a flat floor and
be careful not to tip it over.
When lifting the machine, use the two handles provided on either side of the machine.
Do this work with two or more people.
If the exhaust port is blocked, normal suction power cannot be exerted. Maintain a
sufficient space around the exhaust port.
Leave nearby a fire extinguisher suitable for the collected materials.
For the dust explosion countermeasures (simple explosion-proof specifications)
models, be sure to install the explosion emission port in a safe direction away from
workers.
Electric wiring
●
Use the power supply designated on the nameplate. Operation using power supply
other than specified may cause malfunction and is extremely dangerous.
Before connecting the power supply, be sure to connect the ground cable.
Use a power supply fuse (circuit breaker) suitable for the startup current.
Use a voltage within ±5% of the rated voltage.
(Temporary fluctuation in voltage: ±10% or less)
Use a current within the rated current.
Never increase operation speed run using an inverter. Doing so may damage the
blower.
Rated Current for Standard Products
100V single-phase
220V single-phase
50Hz
60Hz
50Hz
6.0A
7.8A
2.8A
For three-phase power supply, voltage specifications other than the above in single- or three-
phase, or other custom specifications, please contact us.
Test run
Re-check the following items before a trial or test run:
The power cord and ground cable connection, insulation and voltage within the
specified value:
