7
Ordercode: 42330
Dancefloor Sparkle RGB
Overview
Fig. 01
01)
16x RGB (5050SMD) LEDs
Backside
Fig. 02
02)
2,5 mm DC connection cable male
03)
2,5 mm DC connection cable female
Installation
Remove all packing materials from the
Dancefloor Sparkle RGB
. Check that all foam and plastic padding
is removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
