21
42674
Cameleon Flood 15WW
DMX Channels
1 DMX Channel
Channel 1 – Dimmer intensity
0-255
Gradual adjustment, from dark to brightest 0-100%
2 DMX Channels
Channel 1 – Master Dimmer intensity
0-255
Gradual adjustment, from dark to brightest 0-100%
Channel 2 – Linear strobe (CH1 must be set between 1-255
)
0-10
Closed
11-255
Strobe flash frequency, from slow to fast (0-15 Hz)
Maintenance
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by an expert after every year in the course of an acceptance test.
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
01)
All screws used for installing the device or parts of the device have to be tightly connected and
must not be corroded.
02)
There may not be any deformations on housings, fixations and installation spots.
03)
Mechanically moving parts like axles, eyes and others may not show any traces of wearing.
04)
The electric power supply cables must not show any damages or material fatigue.
The Cameleon Flood 15WW requires almost no maintenance. However, you should keep the unit clean.
Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply, and
then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and
a soft cloth. Do not use alcohol or solvents.
The front lens will require weekly cleaning, as smoke-fluid tends to build up residues, reducing the light-
output very quickly.
Keep connections clean. Make sure connections are thoroughly dry before linking equipment or
supplying electric power.
Summary of Contents for Cameleon Flood 15WW
Page 26: ...25 42674 Cameleon Flood 15WW Dimensions ...
Page 27: ...26 42674 Cameleon Flood 15WW ...
Page 28: ... 2018 Showtec ...
