Show Tec Cameleon Flood 15WW Manual Download

Page: 21 / 28

42674

Cameleon Flood 15WW

Optional remote control

Button

Function

Description

On / Off

Switch the device ON or OFF

Program

Activates the Built-in program

Speed

Activates the Program speed mode

Strobe

Activates the Strobe frequency mode

Dimming

Activates the Manual mode

Plus

Increase button

Minus

Decrease button

Note: Please make sure you activate the program mode in the main menu in order to control the device
with the remote control.

Built-in program

01)

Press the

button to activate the Built-in program mode.

02)

Press the

button to set the program speed.

03)

Press the

and

buttons to increase/decrease the program speed. The adjustment range is

between 01-100.

04)

Press the

button to set the strobe frequency.

05)

Press the

and

buttons to increase/decrease the strobe frequency. The adjustment range is

between 0-15Hz, from OFF to high strobe frequency.

Manual mode

01)

Press the

button to activate the manual mode.

02)

Press the

and

buttons to set the intensity of the Cameleon Flood between 0-255.

Summary of Contents for Cameleon Flood 15WW





























Search results

Summary of Contents for Cameleon Flood 15WW

Reviews:

Related manuals for Cameleon Flood 15WW

Brands by name

Popular brands

Show Tec Cameleon Flood 15WW, Manual

Search results

Summary of Contents for Cameleon Flood 15WW

Reviews:

Related manuals for Cameleon Flood 15WW

Brands by name

Popular brands